Skip to content
WebEDrums

Yamaha DTX402 and DTX6 with WebEDrums: USB MIDI setup, preset and pad map

Yamaha's DTX402 series (DTX402K, DTX432K, DTX452K) and the DTX6 kits with the DTX-PRO module connect to a computer through a USB TO HOST port and work with the standard drivers for MIDI. This page covers that connection, the Yamaha preset in WebEDrums and the notes it maps, including the tom 2 note Yamaha places differently from the General MIDI layout, how to keep the latency down with the module's AUX IN, and what to expect in Chrome, Edge and Firefox.

Published by WebEDrums Updated

Three full plays a day, every feature, no account. Chrome, Edge or Firefox.

Which Yamaha DTX models work with WebEDrums?

Yamaha's DTX402 series is three kits with one owner's manual: the DTX402K, the DTX432K and the DTX452K. They differ in the hi-hat controller, the kick and, on the DTX452K, the snare pad. Checked on 8 November 2026 against that manual. The DTX6 kits with the DTX-PRO module are covered in the sections below.

The Yamaha DTX models, what the manufacturer lists for each and what it means in WebEDrums
ModelWhat the manufacturer listsIn WebEDrums
Yamaha DTX402K Yamaha's package list names an HH40 hi-hat controller and a KU100 kick unit, with the cymbal and hi-hat pads, a crash pad and the drum module. The manual describes one drum module for the three kits, with a USB TO HOST terminal; the Yamaha preset applies.
Yamaha DTX432K An HH65 hi-hat controller, a KP65 kick pad and an FP6110A foot pedal. Covered by the same manual and the same connections as the DTX402K, so the setup is the same.
Yamaha DTX452K As the DTX432K, plus a TP70S snare pad that gives three sounds, head, open rim and closed rim (cross stick), depending on where it is struck. The preset's snare notes, head, rim and cross-stick, all play the red lane, so the three zones count as the snare. If you changed the note numbers on the module, run the guided setup.

Questions about the Yamaha DTX models

Do the DTX402K, DTX432K and DTX452K all work with WebEDrums?

Yes. One Yamaha owner's manual covers all three and describes a USB TO HOST terminal that sends and receives audio and MIDI. WebEDrums needs only the MIDI: Yamaha says the Yamaha Steinberg USB Driver is not required on a Mac, or on Windows when the computer handles only MIDI data.

Does the DTX452K's snare play rim shots in WebEDrums?

Yes, as the red lane. The TP70S snare pad has a head zone, an open-rim zone and a closed-rim (cross-stick) zone, and the Yamaha preset maps the snare's head, rim and cross-stick notes to red. The manual lets you change the note number each pad sends; if you did, run the guided setup so WebEDrums hears the new numbers.

Does the DTX6 with the DTX-PRO module work too?

Yes, with the same preset. Yamaha says the DTX-PRO's USB terminal sends and receives both MIDI and audio with a computer or smart device. If you have edited its trigger settings, use the guided setup instead of the defaults.

How does the Yamaha DTX connect to a computer?

Through the USB TO HOST terminal, a USB-B socket that Yamaha's specifications list among the DTX402 module's connectors. Yamaha's own computer-connection guide says the standard drivers of Windows and macOS handle MIDI and that no other driver is needed; the Yamaha Steinberg USB Driver is only for audio over USB on Windows, which WebEDrums does not use. Yamaha's order of operations: switch the module off, connect the cable to USB TO HOST and then to the computer, then switch the module on; the cable should be a data cable under 3 metres.

The DTX-PRO module of the DTX6 series has the same kind of USB terminal, which Yamaha says sends and receives both MIDI and audio with a computer or smart device, plus a 5-pin MIDI OUT for hardware. Yamaha's DTX402 Touch app connects to the module by USB too; close it, and on Windows any other MIDI program, before opening the browser, since Windows gives a MIDI device to one program at a time.

Which preset do I pick in WebEDrums?

When the module's USB name contains Yamaha or DTX, the kit setup page offers "Use Yamaha defaults instead": the table below. The app's Yamaha preset follows Yamaha's DTX402 reference manual and differs from General MIDI in one detail, tom 2 on note 47 where General MIDI has 45. The guided setup gives the same result by listening to each pad, and is the better choice on a DTX6 whose trigger settings you have edited. Review each pad's lane, save, and change it later in Settings, Kit.

Which pads and zones does the Yamaha preset map?

This table is generated from the preset inside the app, so it is what WebEDrums listens for when you choose the Yamaha defaults. Several notes end up on one lane on purpose: the games have one red lane, not a head and a rim.

MIDI notes the Yamaha preset maps to each pad and lane
PadNotes the preset listens forPlays as
Kick 36 head Kick
Snare 38 head · 40 rim · 37 cross-stick Red (snare)
Hi-hat 46 bow · 42 bow Yellow cymbal
Tom 1 (high) 48 head Yellow tom
Tom 2 (mid) 47 head Blue tom
Floor tom 43 head Green tom
Crash 49 bow Green cymbal
Ride 51 bow Blue cymbal
Crash 2 (optional) 83 bow Green cymbal
  • Tom 2 is note 47 on Yamaha modules. The General MIDI preset treats 47 as the rim of tom 2, which lands on the same blue lane, so a module detected as generic still plays the toms correctly; the Yamaha defaults just list exactly what the module sends.
  • Snare head, rim and cross-stick play red; the hi-hat's open and closed notes (46 and 42) play the yellow cymbal; a pedal-only chick is unmapped and therefore ignored.
  • The DTX402 module has one crash input and one ride input (its connectors are SNARE, CRASH, HI-HAT CTL, KICK/PAD, TOM1 to TOM3, RIDE and HI-HAT), so the Crash 2 row only matters on a module with a second crash pad; skip it in the guided setup otherwise.
  • A note outside the table is silent rather than an overhit, and a release sent as a zero-velocity note-on, which some Yamaha modules do, is treated as a release.

How do I keep the latency down?

The module's sounds are instant on its PHONES/OUTPUT jack. The DTX402 has an AUX IN mini-jack for a music player: feed the computer's headphone output into it and the song and the kit meet in your headphones with no software in between, the splitter diagram on the home page with the module as the mixer. The DTX-PRO can also receive the computer's audio over USB, which needs the Yamaha Steinberg USB Driver on Windows; a cable into AUX IN is simpler and needs none.

Turn on "Kit sounds in the browser" only when the module is muted or silent, then run the six-second calibration (eight clicks, hit the snare on each) so hits are judged against the delayed sound you actually hear.

What works in Chrome, Edge and Firefox?

Chrome and Edge on Windows, macOS and Linux, and Chrome on ChromeOS. The module appears as a USB MIDI device under its Yamaha name after the one-time MIDI permission (Chrome has prompted for all MIDI access since version 124), and WebEDrums picks it as the drum input because the name matches. Safari cannot talk to the kit. If the browser lists nothing, follow Yamaha's connection order once more, with a data cable and no hub, and make sure the DTX402 Touch app or a recording program is not holding the module on Windows.

Firefox 108 and newer reads the module over the same Web MIDI. Switch the module on and plug it in before you open Firefox, because Firefox lists MIDI devices only when it starts. The first time, it asks to install a small site-permission add-on for WebEDrums: accept it. It also forgets the songs folder between visits. The Firefox section of the connection FAQ has the fixes when it does not ask or does not see the kit.

Which games and apps read the Yamaha DTX?

Any of them that takes MIDI, since the module sends standard notes over USB. The setup differs per program: the Clone Hero drums setup and the YARG drums setup guides walk through the desktop games with the fixes for a kit that is not detected; the connection guide covers cables and drivers for all of them; and the comparison lays the apps side by side, WebEDrums included.

Not bought it yet, or thinking of the next kit?

The buying guide puts the Yamaha DTX next to the other kits with a setup page here: level, price range, what each maker lists for the pads, the hi-hat, the kick and the room to grow, and what owners complain about on each.

Sources

Checked on October 16, 2026. If one of these pages has changed and this guide has not caught up, tell us on the contact page.

Product names belong to their owners; WebEDrums is not affiliated with Clone Hero, YARG, Alesis, Roland or Yamaha.