Which Roland TD716 and TD713 models work with WebEDrums?
The table lists what Roland's TD716 and TD713 pages say, checked on 11 November 2026. The V-Drums 5 Series page covers the kits below them. We have not played or connected a V71 kit.
| Model | What the manufacturer lists | In WebEDrums |
|---|---|---|
| Roland TD716 | Roland lists a V71 module, a PD-14DSX digital snare, two 10-inch PD-10X toms and two 12-inch PD-12X toms, a 14-inch VH-14D digital hi-hat, two 16-inch CY-16R-T crashes, an 18-inch CY-18DR digital ride, an 18-inch KD-18-BK kick drum and an MDS-Stage 2 stand. The kick pedal, the snare stand, the hi-hat stand and the throne are not included. | The Roland preset's notes, over the USB cable (see the preset section for what we have not checked on the V71). The kit has four toms and WebEDrums has three tom slots: map the three you want to play and leave the fourth unmapped. The second crash maps to Crash 2. |
| Roland TD713 | The same V71 module, snare, hi-hat and ride, with four 10-inch PDX-100 toms, a 14-inch CY-14R-T crash and a 16-inch CY-16R-T second crash, a KD-12 kick pad and an MDS-Grand 2 stand. The kick pedal, the snare stand, the hi-hat stand and the throne are not included. | The same connection and preset, and the same four toms for three slots. The second crash maps to Crash 2. |
Questions about the Roland TD716 and TD713 models
What is the difference between the TD716 and the TD713?
Both are built on the V71 module with the same digital snare, hi-hat and ride. Roland's lists differ in the toms (two 10-inch and two 12-inch PD-X pads on the TD716, four 10-inch PDX-100 pads on the TD713), the crashes (two 16-inch, against a 14-inch and a 16-inch), the kick (an 18-inch KD-18-BK drum against a KD-12 pad) and the stand. In WebEDrums the connection and the preset are the same.
Both kits have four toms. How does that work in WebEDrums?
Drum charts use three tom lanes, so WebEDrums has three tom slots and two crash slots. In the guided setup, map the three toms you want to play and leave the fourth unmapped: a note outside the table is silent rather than counted as a stray hit. Which three is up to you.
Does the V71 need a driver to work with WebEDrums?
Not for MIDI. Roland lists the V71's USB as class compliant for audio and MIDI, and its manual describes two driver modes: GENERIC uses the operating system's driver and carries USB MIDI with two channels of audio, and VENDOR uses Roland's driver and carries USB MIDI with 32 channels. WebEDrums needs only the MIDI, which both carry. The mode is under SETUP, USB AUDIO, Driver Mode, and a change takes effect after a power cycle.
Which USB cable does the V71 need?
The V71's USB COMPUTER port is USB Type-C, and Roland's manual says no cable is included. Its troubleshooting page says the module does not work with USB 3.0 cables and tells you to use a USB 2.0 cable, and the manual asks for a USB 2.0 Hi-Speed port on the computer.
How do the Roland TD716 and TD713 connect to a computer?
Through the V71's USB COMPUTER port, which is USB Type-C and which Roland lists as class compliant for audio and MIDI. The manual describes two driver modes: GENERIC, on the operating system's driver, carries USB MIDI and two channels of audio; VENDOR needs Roland's driver and carries USB MIDI and 32 channels. WebEDrums needs only MIDI, so GENERIC works with nothing installed and a module already in VENDOR mode needs no change. The setting is under SETUP, USB AUDIO, Driver Mode, and takes effect after a power cycle.
Roland's manual says no USB cable comes with the module, that it does not work with USB 3.0 cables, and to use a USB 2.0 cable on a USB 2.0 Hi-Speed port. The module also has MIDI IN and OUT/THRU connectors and Bluetooth for audio and MIDI; we have tested neither, and the connection described here is the cable.
Which preset do I pick in WebEDrums?
The kit setup page starts from the Roland defaults, the table below, when the module's USB name contains Roland, TD- or V-Drums, and says so: "Using the Roland defaults". We have not connected a V71, so we do not know the name it reports. If the page says "Using the General MIDI defaults" instead, or a pad lights the wrong drum, choose "Record every pad": the app listens to each pad in turn, zone by zone, and saves what it hears, which works for any module.
Roland publishes the V71's default note numbers on its support site and in the module's Data List; we could not open either, so the table below is not checked against them, and the recorded setup does not depend on them. Review each pad's lane before saving, and change it later in Settings, Kit, Edit mapping.
Which pads and zones does the Roland preset map?
This table is generated from the preset inside the app, so it is what WebEDrums listens for when you choose the Roland defaults. Several notes end up on one lane on purpose: the games have one red lane, not a head and a rim.
| Pad | Notes the preset listens for | Plays as |
|---|---|---|
| Kick | 36 head | Kick |
| Snare | 38 head · 40 rim · 37 cross-stick | Red (snare) |
| Hi-hat | 46 bow · 26 edge · 42 bow · 22 edge | Yellow cymbal |
| Tom 1 (high) | 48 head · 50 rim | Yellow tom |
| Tom 2 (mid) | 45 head · 47 rim | Blue tom |
| Floor tom | 43 head · 58 rim | Green tom |
| Crash | 49 bow · 55 edge | Green cymbal |
| Ride | 51 bow · 59 edge · 53 bell | Blue cymbal |
| Crash 2 (optional) | 57 bow · 52 edge | Green cymbal |
- Toms: four on both kits, three slots here. Record the three you play in songs and skip the fourth; its notes stay silent.
- Second crash: both kits ship with one. Map it to the Crash 2 row; it plays the green cymbal with the first.
- Ride and hi-hat: every zone of the digital CY-18DR plays the blue cymbal, and open and closed notes of the VH-14D all play the yellow cymbal. Position messages are ignored and only the notes count.
- AUX jacks: Roland lists four, AUX 1 to AUX 4. An auxiliary pad has no slot in WebEDrums and stays silent.
How do I keep the latency down?
Roland lists a MIX IN jack on the V71, a stereo quarter-inch socket, and two PHONES jacks. A cable from the computer's headphone output into MIX IN puts the song next to the kit in the module's headphones, with no software delay on the drums; Roland's pages do not describe how MIX IN is balanced, so check the module's guide. Audio streamed to the module over Bluetooth adds its own delay to the song.
The module's own sounds have no software delay, so headphones on the module are the lowest-latency way to hear the kit. If you would rather hear the browser's drum sounds ("Kit sounds in the browser" in Settings, Audio, six kit styles), run the timing calibration once: eight clicks, hit the snare on each, about six seconds. It measures your computer's audio delay and judges hits against what you heard. Audio sent to the module or the headphones over Bluetooth adds its own delay to the song, so calibrate again after switching to it, or stay wired.
What works in Chrome, Edge and Firefox?
Chrome and Edge on Windows, macOS and Linux, and Chrome on ChromeOS. The module appears as a USB MIDI device under its own name after a one-time MIDI permission (Chrome has prompted for all MIDI access since version 124), and the setting survives reloads. Safari has no Web MIDI, so a Mac needs Chrome, Edge or Firefox. If the browser lists nothing, check that the cable carries data, try another port without a hub, and close any other program that has the module open.
Firefox 108 and newer reads the module over the same Web MIDI. Switch the module on and plug it in before you open Firefox, because Firefox lists MIDI devices only when it starts. The first time, it asks to install a small site-permission add-on for WebEDrums: accept it. It also forgets the songs folder between visits. The Firefox section of the connection FAQ has the fixes when it does not ask or does not see the kit.
Which games and apps read the Roland TD716 and TD713?
Any of them that takes MIDI, since the module sends standard notes over USB. The setup differs per program: the Clone Hero drums setup and the YARG drums setup guides walk through the desktop games with the fixes for a kit that is not detected; the connection guide covers cables and drivers for all of them; and the comparison lays the apps side by side, WebEDrums included.
Not bought it yet, or thinking of the next kit?
The buying guide puts the Roland TD716 and TD713 next to the other kits with a setup page here: level, price range, what each maker lists for the pads, the hi-hat, the kick and the room to grow, and what owners complain about on each. The other Roland kits are on the Roland page.
Sources
Checked on November 11, 2026. If one of these pages has changed and this guide has not caught up, tell us on the contact page.
- Roland: TD716 product page (kit parts)
- Roland: TD716 specifications (kit configuration, what is not included)
- Roland: TD713 product page (kit parts)
- Roland: TD713 specifications
- Roland: V71 specifications (connectors, USB modes, trigger inputs)
- Roland: V71 reference manual, Configuring the USB driver
- Roland: V71 reference manual, Troubleshooting (USB cables)
- Roland: V71 reference manual, Connecting a computer (no cable included, USB 2.0 port)
- Chrome for Developers: Web MIDI permission prompt